EPA
Washdown QuickBerm® 2858 Justrite
Art. no: 2858
Please share this article with others
Copy this link. After this you can paste and share it.
Product description
Portable drive-through station captures contaminated water from vehicle and construction equipment wash down.
Quickly go to
Overview
Product Features
- Portable Design: Convenient drive-through setup captures wash water for safe containment and disposal. Compact Storage: Removable 4-inch foam inserts support the sidewalls and allow the berm to fold down for quick and easy storage.
- Durable Construction: Made from modified PVC coated fabric with reinforced, radio frequency-welded seams for long-lasting use.
- High Visibility: Yellow runway strips withstand drive-thru traffic and improve visibility on busy work sites.
- End Wall Support: Includes pockets for 2-inch x 8-inch planks (not included) to keep end walls elevated and secure and preventing wastewater from escaping during drive-over.
- Efficient Drainage: Two 1-inch NPT fittings on each side make it easy to redirect and drain liquids as needed.
- Regulatory Compliance: Designed to help comply with EPA stormwater regulations, protecting waterways from harmful runoff.
- Secure Anchoring: Brass grommets around the perimeter provide anchoring points for stability during use (stakes not included).
Product description
Portable drive-through station captures contaminated water from vehicle and construction equipment wash down. Durable vinyl coated material reinforced with radio frequency-welded, high visibility yellow runway strips that withstand drive-thru traffic, including backhoes and skid steers. Removable 4-in (102-mm) diameter foam inserts support sidewalls while 2-in H x 8-in W (51- x 203-mm) planks (not included) slide into pockets to keep end walls elevated preventing wastewater from escaping during drive-over. Simply remove foam inserts to fold material for quick and compact storage. Two 1-in NPT fittings on each side of the berm for drainage. Brass grommets around perimeter provide the ability to securely anchor berm during use. Anchor stakes not included. Helps comply with EPA for stormwater regulations.
Documentation & video
- justrite-2858-washdown-quick-berm-specification-de-84682
- justrite-2858-washdown-quick-berm-specification-en-84683
- justrite-2858-washdown-quick-berm-specification-es-84685
- justrite-2858-washdown-quick-berm-specification-fr-84687
- justrite-2858-washdown-quick-berm-specification-it-84689
- justrite-2858-washdown-quick-berm-specification-nl-84691
- justrite-2858-washdown-quick-berm-specification-pt-84693
Compliances
EPA CFR 40
EPA CFR 40
264.175 Containment. (a) Container storage areas must have a containment system that is designed and operated in accordance with paragraph (b) of this section, except as otherwise provided by paragraph (c) of this section. (b) A containment system must be designed and operated as follows: (1) A base must underlie the containers which is free of cracks or gaps and is sufficiently impervious to contain leaks, spills, and accumulated precipitation until the collected material is detected and removed; (2) The base must be sloped or the containment system must be otherwise designed and operated to drain and remove liquids resulting from leaks, spills, or precipitation, unless the containers are elevated or are otherwise protected from contact with accumulated liquids; (3) The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater. Containers that do not contain free liquids need not be considered in this determination; (4) Run-on into the containment system must be prevented unless the collection system has sufficient excess capacity in addition to that required in paragraph (b)(3) of this section to contain any run-on which might enter the system; and (5) Spilled or leaked waste and accumulated precipitation must be removed from the sump or collection area in as timely a manner as is necessary to prevent overflow of the collection system. (c) Storage areas that store containers holding only wastes that do not contain free liquids need not have a containment system defined by paragraph (b) of this section, except as provided by paragraph (d) of this section or provided that: (1) The storage area is sloped or is otherwise designed and operated to drain and remove liquid resulting from precipitation, or (2) The containers are elevated or are otherwise protected from contact with accumulated liquid. (d) Storage areas that store containers holding the wastes listed below that do not contain free liquids must have a containment system defined by paragraph (b) of this section: (1) FO20, FO21, FO22, FO23, FO26, and FO27. (2) [Reserved]
Technical specifications
General specifications
| High Hazard Seismic Zone | No |
|---|